Description

US Plug Wireless Plug-in Receiver Motion Sensor Doorbell Home Security Alarm System,

How to Use the Wireless Plug-in Receiver Motion Sensor Alarm

Step 1: Installation

1. Choose a suitable location to install the wall mount for the motion sensor alarm.
2. Use screws or adhesive tape (not included) to securely attach the wall mount to the desired location.
3. Plug the receiver into a power outlet.

Step 2: Pairing the Motion Sensor Alarm

1. Press and hold the “Pair” button on the receiver until it beeps.
2. Within 60 seconds of pressing the “Pair” button, press the “Pair” button on the motion sensor to initiate pairing.
3. The receiver and motion sensor will automatically pair and the LED indicators will confirm the successful connection.

Step 3: Selecting Chime Tunes

1. Press the “Tune” button on the receiver to cycle through the available chime tunes.
2. Release the button when you find the desired chime tune.

Step 4: Adjusting Volume

1. Press the “Volume” button on the receiver to adjust the volume level.
2. Release the button when you reach the desired volume level.

Step 5: Testing the Motion Sensor Alarm

1. Ensure the motion sensor is properly installed at the desired location.
2. Walk in front of the motion sensor to trigger the alarm.
3. The receiver will play the selected chime tune to indicate motion detection.

Step 6: Maintenance

1. Keep the motion sensor and receiver clean and free from dust or debris.
2. Replace the batteries in the motion sensor as needed.

Note:

The receiver can be placed in any location within the wireless range of the motion sensor. It is recommended to test the signal strength before mounting the receiver permanently. The wireless range may vary depending on environmental factors.

, ,